Canature Hydrotech 95MTS Control Valve

$1.00

Valve body material: Noryl (PPO)
Plumbing connections: Straight 1″, 1-1/4″; 1.25″.
Tank thread: 2-1/2″ NPSM, 4″ NPSM
Adjustable cycles: 0 – 99 minutes
Regeneration: Downflow
Meter accuracy: +/-5%.
Pilot distributor: 1.05″ OD (1″ pipe), 1.5″ (pipe)
Drain line: 3/4″, 1″
Brine line: 3/8″, 1/2″.
Certification: NSF/ANSI 44

Description

Canature 95MTS control valve for filter or softener

The Canature 95MTS control valve is capable of high flow rates, whether for commercial or residential applications, thanks to its quality construction with reliable piston, seals and electronic sensors.

Its large display makes the operation, programming and monitoring of the valve user-friendly, as it shows information such as time, remaining capacity, as well as flow rate.

The valve is warranted for 5 years against manufacturing defects.

Water flow at 50 psi at the inlet

Continuous flow (15 psi pressure drop)

39 GPM

Maximum flow (25 psi pressure drop)

50 GPM

Maximum Backwash (25 psi pressure drop)

32 GPM

Volumetric flow coefficient

10 Cv

Standard applications

Softener

Diameter up to 24 inches

Filter

Diameter up to 21 inches

Electrical specifications

Input voltage

110V AC at 50/60Hz

Output voltage

12V AC at 50/60Hz with current 410mA

Safety certificate

cUL

Operating parameters

Maximum operating pressure

Range 20 to 125 psi

Working temperature limit

From 34°F to 100°F (1.1°C - 37.7°C)

1. High capacity

Ideal for filtration or softening systems in both residential and commercial environments.

2.

Quick and easy assembly

It includes fast connections, advanced electronic sensors and waterproof electrical system.

3.

Integrated turbine meter

The equipment integrates a turbine meter for accurate measurement of water flow.

4.

Energy backup

Capable of maintaining the time settings for 48 hours without power, keeping the general settings in its permanent memory.

5.

Intuitive interface

It includes a display that facilitates the visualization of the current time, available capacity and water flow.

6.

Cycle programming

Adjustment and customization of regeneration cycles based on system needs.

7.

Multiple tanks

Allows interconnection of up to 8 tanks in the system to obtain softened water at all times.

8.

Dynamic tank management

In multi-tank systems, they operate on a flow demand basis.

9.

5-year warranty

Five-year warranty for defects originated in the manufacturing process.

Comparative table of control valves


Features	65CC	765	565	785	89	95	105
Valve material	Noryl (PPO)	Noryl (PPO)	Noryl (PPO)	Noryl (PPO)	Noryl (PPO)	Noryl (PPO)	Noryl (PPO)
Input / Output	3/4″, 1″	3/4″, 1″	3/4″, 1″	3/4″, 1″	1″	1″, 1-1/4″, 1 1/2″	2″
Service flow (gpm)	20 GPM	20 GPM	20 GPM	20 GPM	27 GPM	39 GPM	70 GPM
Maximum flow (gpm)	26 GPM	26 GPM	26 GPM	26 GPM	35 GPM	50 GPM	90 GPM
Backwash flow (gpm)	7 GPM	7 GPM	7 GPM	17 GPM	27 GPM	32 GPM	70 GPM
Upflow / Downflow	NA / X	NA / X	NA / X	X / X	X / X	NA / X	NA / X
Adjustable cycle time	NA	Yes	Yes	Yes	Yes	Yes	Yes
Duplex	NA	NA	NA	NA	NA	Yes	Yes
Multiplex	NA	NA	NA	NA	NA	Yes	Yes
Drainage size	1/2″	1/2″	1/2″	1/2″	3/4″	3/4″, 1″	1.5″ o 2″
Brine size	3/8″	3/8″	3/8″	3/8″	3/8″	3/8″, 1/2″	1/2″
Pilot distributor	1.05″	1.05″	1.05″	1.05″	1.05″	1.5″	1.5″
Filter tank size	10″	10″	10″	16″	18″	21″	30″
Softener tank size	16″	16″	16″	16″	18″	24″	36″