Apel ozone generator for water.

Ozone generator for water. Environmental air driven by a pump enters a manual air dryer. This dryer contains a material called silica gel, which serves to retain moisture. an indicator that it is working properly is the color change. Silica gel when dry is blue in color, and when wet it is pink to orange in color; sometimes we will see white.

It is very important to regenerate this silica gel to avoid the creation of nitric acid inside the quartz tube. To regenerate the silica gel, it is sufficient to heat it slowly to a temperature between 180° and 100°C. Upon heating the silica gel will change back to its blue color. The dry air feeds the ozone generation chamber, which generates the spark with a high voltage discharge, provided by a coil controlled by an electronic card.

Once the ozone is generated, it leaves the equipment through a hose until it reaches a diffuser that will evenly distribute the ozone bubble in the water.

The equipment has been designed for disinfection applications where the equipment’s hose with its diffuser can be introduced into a container with water.

Ozone characteristics for water Apel.

Crown discharge ozone, 0.4 g/h, with air dryer / 1.3 g/h with oxygen O2

Input voltage: 120 Vots

Dimensions: 30 x 25 x 15 cm

Ozone output: 0.4 gr/h, with dry air,

Applications: Water purification plants, small treatment plants, hotels, SPA,

Product images are demonstrative and may vary from the physical product.

 

Find more ozone generators here: https://carbotecnia.info/?s=ozono