Polydepth Pentek Cartridge

Thermally fused polypropylene microfiber construction for more efficient filtration.

Constant flow rate and superior filtration performance

They do not impart flavor, odor or color to the liquid to be filtered

Ideal for a wide variety of industrial filtration applications

Nominal ratings of 1, 5, 10, and 25 microns

Lengths: 10″, 20″ and 30″.

Product images are demonstrative and may vary from the physical product.

Polydepth Penktek Cartridge Filters

9 3/4″ cartridges

Polydepth Cartridge 9 ¾” x 2.32″ Standard, 1 Micron

Polydepth Cartridge 9 ¾” x 2.32″ Standard, 5 Microns

Polydepth Cartridge 9 ¾” x 2.32″ Standard 10 Microns

Polydepth Cartridge 9 ¾” x 2.32″ Standard, 25 Micra

20″ cartridges

Polydepth Cartridge 20″ x 2.32″ Standard, 1 Micron

Polydepth Cartridge 20″ x 2.32″ Standard, 5 Microns

Polydepth Cartridge 20″ x 2.32″ Standard, 10 Microns

Polydepth Cartridge 20″ x 2.32″ Standard, 25 Microns

Polydepth Cartridge 20″ x 2.32″ Standard, 50 Microns

 

30″ cartridges

PD-1-30 x 2.32″ Polydepth Cartridge

PD-5-30 x 2.32″ Polydepth Cartridge

 

Pentair Pentek Polydepth Filtration Cartridges are manufactured from thermally fused polypropylene microfibers to ensure high efficiency. This filter incorporates a rigid polypropylene core for durability and resistance to shrinkage. This microfiber construction has minimal fiber release, consistent flow rate and superior filtration performance. A cartridge that is neither fragile nor prone to breakage problems like resin fused cartridges.

Unique microgrooves provide additional surface area.

Polydepth Cartridges impart no taste, odor or color to the liquid to be filtered, making it ideal for food and beverage applications. The recommended temperature limit of 40-175°F (4.4-79.4°C) allows it to be used in many hot water applications. In addition, the polypropylene construction provides greater chemical resistance and is not prone to bacterial attack.

Available in different lengths from 9.75″ to 40″. Unlike competitive cartridges, longer lengths are not manufactured by gluing shorter cartridges together. They are cartridges

that cannot be separated during use and do not sacrifice filtration surface area.

Data shown reflect the performance of 10″ cartridges. The pressure drop of the 20″, 30″ and 40″ cartridge can be approximately calculated by dividing the above psi by 2, 3 and 4, respectively, at the same flow rate.

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.