pH, redox, chlorine, conductivity, conductive and inductive conductivity meter and controller

$1.00

Meter for up to 5 water parameters.

Applications:

Measurement and regulation of water parameters for industrial and process water treatment.
Permeate monitoring in reverse osmosis equipment.
Measurement and regulation of water quality parameters in swimming pools.

Description

Compact meter and controller for up to 5 water quality parameters.

DULCOMETER® Compact is the online measuring and control instrument for the analysis of basic water parameters.

In addition to controlling the circuit between the sensors, DULCOTEST® has a pulse frequency output for controlling a metering pump.

Everything you require for the reliable treatment of service and process water in industry, as well as drinking and swimming pool water.

Benefits

Flexibility thanks to the selection for pH and redox analysis.
Optimal resolution of the measured value thanks to the autoranging function in conductivity.
Different conductivity display options depending on requirements: Conductivity, TDS (Total Dissolved Solids), salinity and specific resistance.
Safety thanks to pH sensor monitoring with glass breakage and cable break detection.
Different mounting options: wall, pole or inside a cabinet.

Technical Information

Measurement of: pH, redox, chlorine, conductivity, conductive and inductive conductivity
Mounting, type of protection: Universal housing (wall mount, control panel mount, pole mount), IP67, control panel, IP54.
Measurement: 1 measuring channel, temperature compensation for conductivity and pH.
Control: PID controller, 1-way controller (e.g. with acid or alkaline pH).
Control inputs: 1 digital control input

Available Products:

(Includes controllers, cables, sensors, sensor holders and fastening panel.):

Product Code	Manufacturer’s Code	Description
P_161270	PMCC-CLB	Compact CLB Measurement and Control Panel
P_161271	PMCC-PH	Compact pH Measurement and Control Panel
P_161272	PMCC-ORP	Compact ORP Measurement and Control Panel

Measurement range	pH: 0.00 – 14 Redox: -1,000 / +1,000 mV Chlorine: 0.05 to 5 ppm, shock dosing up to 10 ppm, 12 h max. Conductive conductivity: 0.5 µS/cm to 20 mS/cm (automatic remote scanning) Inductive conductivity with ICT 1: 200 µS/cm to 1000 mS/cm (automatic remote scanning) Inductive conductivity with ICT 2: 20 µS/cm to 2000 mS/cm (automatic remote scanning) Inductive conductivity with ICT 5: 200 μS/cm to 2000 mS/cm (automatic remote scanning)
Resolution	pH: 0.01 pH Redox: 1 mV Chlorine: 0.01 ppm Conductivity: 0.1 µS/cm (depending on measuring range)
Accuracy	0.5 % of the final value of the measurement range
Temperature compensation range	0 to 120° C, chlorine 1 to 45° C
Control	1-way PID control with selectable control direction
Inputs	Sensor input suitable for the measured variable Temperature sensor input: pH: Pt 1000, chlorine and conductivity: Pt 100/ Pt 1000 1 digital input as remote input for pause, regulation/error functions of the measuring water.
Outputs	1 pulse frequency output for controlling metering pumps. 1 output 0/4 to 20 mA active, configurable as measured variable or setpoint variable, max. capacitive load: 400 Ω. 1 power relay as changeover switch, configurable as alarm, limit value or activation output with pulse width modulation for motor driven metering pumps.
Cell constant, conductivity	0.05 to 12.0 cm^-1
Power supply	100 to 230 V, 50/60 Hz, 5 W
Permissible operating temperature	-10 to +60° C
Type of protection	IP 67, in accordance with NEMA 4 X Indoor
Dimensions	135 x 125 x 75 mm (H x W x D)
Weight	0.5 kg