Description
Compact single-channel water quality meter and controller.
DULCOMETER® Compact meter and controller is the online measuring and control instrument for analyzing basic water parameters.
In addition to controlling the circuit between the sensors, DULCOTEST® has a pulse frequency output for controlling a metering pump.
Everything you require for the reliable treatment of service and process water in industry, as well as drinking and swimming pool water.
Advantages of the meter and controller
- Optimal resolution of the measured value thanks to the autoranging function in conductivity.
- Different conductivity display options depending on requirements: Conductivity, TDS (Total Dissolved Solids), salinity and specific resistance.
- Safety thanks to pH sensor monitoring with glass breakage and cable break detection.
- Different mounting options: wall, pole or inside a cabinet.
Applications of the Dulcometer Compact:
- Each controller measures 1 parameter of your choice: pH, redox, chlorine, conductive conductivity, inductive conductivity.
- Measurement and regulation of water parameters for industrial and process water treatment.
- Permeate monitoring in reverse osmosis equipment.
- Meter and regulator of water quality parameters in swimming pools.
- 1 sensor input for the respective measured variable (pH, redox, chlorine, conductivity, conductive and inductive conductivity)
- 1 temperature sensor input.
- 1 digital input for pause functions, (measurement water error).
Panel code:
(Includes controllers, cables, sensors, sensor holders and mounting panel):
Code |
Manufacturer’s code |
Description |
P_161270 |
PMCC-CLB |
Compact CLB Measurement and Control Panel |
P_161271 |
PMCC-PH |
Compact PH Measurement and Control Panel |
P_161272 |
PMCC-ORP |
Compact ORP Measurement and Control Panel |
Technical Data
Measuring ranges |
pH: 0.00 to 14
Redox: -1,000 to +1,000 mV Chlorine: 0.05 to 5 ppm, shock dosing up to 10 ppm, 12 h max. Conductive conductivity: 0.5 µS/cm to 20 mS/cm (automatic remote scanning) Inductive conductivity with ICT 1: 200 µS/cm to 1000 mS/cm (automatic remote scanning) Inductive conductivity with ICT 2: 20 µS/cm to 2000 mS/cm (automatic remote scanning) Inductive conductivity with ICT 5: 200 μS/cm to 2000 mS/cm (automatic remote scanning) (Each controller measures 1 parameter of your choice: pH, redox, chlorine, conductive conductivity, inductive conductivity). |
Resolution |
pH: 0.01 pH
Redox: 1 mV Chlorine: 0.01 ppm Conductivity: 0.1 µS/cm (depending on the measuring range) (Each controller measures 1 parameter of your choice: pH, redox, chlorine, conductive conductivity, inductive conductivity). |
Accuracy |
0.5 % of the final value of the measuring range |
Temperature compensation range |
0 to 120° C, chlorine 1 to 45° C |
Regulation |
1-way PID control with selectable control direction |
Tickets |
Sensor input appropriate to the measured variable
Temperature sensor input: pH: Pt 1000, Chlorine and Conductivity: Pt 100/ Pt 1000 1 digital input as remote input for pause, regulation/error functions of the measurement water |
Exits |
1 pulse frequency output for controlling metering pumps
1 output from 0/4 to 20 mA active configurable as measured variable or adjustment variable, max. capacitive load: 400 Ω. 1 power relay as changeover switch, configurable as alarm, limit value or activation output with pulse-width modulation for motor driven metering pumps |
Cell constant, conductivity, conductive conductivity |
0.05 to 12.0 cm-1 |
Power supply |
100 to 230 V, 50/60 Hz, 5 W |
Permissible operating temperature |
-10 to +60° C |
Type of protection |
IP 67, according to NEMA 4 X Indoor standard |
Dimensions |
135 x 125 x 75 mm (H x W x D x D) |
Weight |
0.5 kg |
