2″ nozzle for false bottom filters
Made of 316L polished stainless steel.
Connection: 2″ bottom opening
Microslot opening of the external part: 0.18 mm
Lower rubber packing.
It includes a foot valve to prevent the return of water. (can be removed if not needed)
Diameter: 82 mm
Slotted part height: 50 mm
Lower opening: 50 mm
Total height: 150 mm
STAINLESS STEEL TOBE ASSEMBLED TO BE PLATED ON A PLATE (water nozzles)
Micro-slotted nozzles are used for the retention of granular media in water treatment equipment. These media can be of any type, such as: activated carbon, silica sand, ion exchange resins, green sand, MTM, Birm, pyrolusite, among others.
In addition to the retention function, the micro-slotted nozzles provide good drainage and adequate flow distribution, both in equipment working under pressure and in those working by gravity.
The Johnson type element through which the fluid flows, has a “V” shaped cut, with the most closed part towards the outside of the nozzle. This design prevents clogging.
The microslot is continuous and has a total flow area of approximately twice the cross-sectional area of the connection nipple. This means that the microslot does not constitute a restriction to flow and, therefore, causes minimal pressure drop.
The 0.18 mm opening in the most closed part, which is in contact with the granular medium, allows any granules larger than 40 mesh to be retained directly. This means that no gravel beds are required for support.