Elkay EZ8WSSSMC Bottle Filler with Cooler

Description

Elkay ezH2O EZ8WSSSMC stainless steel refrigerated bottle filler 8 GPH

Advantages of Elkay ezH2O bottle filler:

Antibacterial
Hands free to avoid contact
Laminar flow without splashing
Actual drainage (others have a waste water container)
Can be wall mounted
Lead-free
Meets federal and state standards for people in wheelchairs
Automatic filling by optical sensor.
With water cooler.

This water dispenser offers fast and clean filling of water bottles and has less impact on the environment because it minimizes dependence on disposable plastic bottles. Thanks to its size, it can be placed in small places. It also features hygienic non-contact sensor activation which has a 20-second automatic shut-off timer.

The Elkay ezH2O water dispenser is perfect for these times of pandemic, because whoever uses it does not need to make contact with any button or part of the dispenser to fill your bottle, thermos or container you need. This is because it has a sensor that detects when it has an object to be filled, the sensor has a timer that makes it turn off after 20 seconds.

Due to its size, this water dispenser has no problems to be installed in any place and its installation is not complicated because it can be mounted on any wall of the place where it is needed. Finally, this bottle filler dispenses cold water for a truly refreshing solution.

Features of EZ8WSSSMC bottle filler:

12-inch wall overhang.
The hermetic cooling system provides chilled water at all times.
Stainless steel grid, the grid is removable for easy cleaning of the sink.
Installation replacement compatible with Elkay EZ and EMAB models.
User-friendly non-contact sensor activation (bottle filling).
Filling speed 1.1 gallons per minute.
Clean filling with minimum splashing
Green Ticker informs the user of the number of 20-ounce plastic water bottles saved from waste.
Eliminates stagnant water thanks to its real drainage system.
Classified for indoor use.

Specifications

Elkay ezH2O® surface mount refrigerated bottle filler, 8 GPH stainless steel without filter. Cooling capacity of 8.0 GPH (gallons per hour) of 50 F potable water, based on 80 F and 90 Fambient inlet water, as tested by ASHRAE 18.

Features should include Antimicrobial, Hands Free, Laminar Flow, True Drainage. Electronic bottle filling sensor activation. The product must be wall mounted, for indoor applications, for 1 station(s).

The unit must be certified according to UL 399 and CAN/CSA C22.2 No. 120. The unit must be of a lead-free design that is certified to NSF/ANSI 61 and 372 (lead-free) and meets federal and state requirements and complies with federal and state low lead requirements.