Stenner Peristaltic Pump

Self-priming, without pressure losses, it can run dry if damaged, chemicals are dosed if exposed to air, pipe that accepts a wide variety of chemicals.

Voltage: 120 and 220

HP: 1/30

Max temperature: 51 ° C

Product images are illustrative and may vary from the physical product.

Stenner adjustable metering pumps are built with three removable components: the motor, the flow control and the hydraulic body. The output flow depends on three factors: the number of revolutions of the motor, the percentage setting on the control of the feeding frequency and the size of the peristaltic pump tube. All Stenner metering pumps have a 3-point design: check valve, which acts as a check valve to prevent backflow, siphon to prevent over-dosing and loss of prime.

The motor shaft rotates at fixed revolutions, which actuate the adjustable feed frequency control, to intermittently dispense within the pump head. The chemical solution in the pump tube is captured between the rollers as they rotate and compress the tube. With the roller advance, the squeeze tube section returns to its original shape and generates a vacuum, creating the self-priming function delivers a constant flow affected by the outlet pressure.


Self-priming up to 25 feet and won't lose its shape

It can handle gaseous liquid chemicals.

The solutions contained in the tube are not in contact with the components of the pump.

Sub-assemblies are attached without tools, easy repair and conversion to another model

Universal pump head pumps to all Stenner

It can run dry without damage.

Won't clog with dirt or debris

Reproducible outputs up to a 2%

Adjustable feed speed control from 5 % to 100 % in increments of 2.5 %

The pump tube accept a wide variety of chemicals

Data sheet



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…