Purtrex filters

Depth Cartridge Filters

The Purtrex depth filter performs unmatched for general applications where long life, high purity and low frequency of cartridge changes are required. Produced through patented GE Water with blown microfiber technology.

Purtrex is a 100% pure polypropylene depth filter with exceptional dirt holding capacity.

Product images are illustrative and may vary from the physical product.

Available sizes and microns

9 7/8 ″ x 2.5 ″ / 5 microns

10 ″ x 2.5 ″ / 1, 5, 10 and 30 microns

20 ″ x 2.5 ″ / 1, 5, 10 and 50 microns

29 1/4 ″ x 2.5 ″ / 1 and 5 microns

30 ″ x 2.5 ″ / 1, 5, 10 and 20 microns

50 ″ x 2.5 ″ / 1 and 5 microns

XK series

30 ″ x 2.5 ″ / 1 and 5 microns

40 ″ x 2.5 ″ / 1 and 5 microns

Benefits and Features

Purtrex is a true graded density filter (lower density at the filter surface with progressively higher density towards the center) captures particulates throughout the entire depth of the filter. This results in a longer life and fewer changes from existing coiled rope or agglomerated filters.

Purtrex does not contain wetting agents, solvents, antistatic agents, or binders, and meets FDA requirements for food and beverage contact.

GE Purtrex

Applications

  • Drinking water filtration
  • Chemical filtration - wide chemical compatibility
  • Galvanic baths
  • Amine filtration
  • Complies with the FDA for food and beverages.
  • Markets served
  • Food and drinks
  • electronics
  • Reverse osmosis pre-treatment
  • Metal Finishing
  • Oil and gas
  • Pulp and Paper
  • Fine chemicals

Micron ratings also available

1, 3, 5, 10, 20, 30, 50, and 75 microns

Construction materials

Filtration media: Polypropylene

Caps and Adapters: Polypropylene

Product dimensions and orders

Nominal outside diameter 2.50 inches (6.4 cm)

1 inch (2.5 cm) nominal inside diameter

Additional Information

Purtrex Depth Cartridge Filters are made from thermally bonded polypropylene fibers. GE Water certifies that it does not use resin binders, lubricants, antistatic loosening agents, or other additives in the manufacture of these cartridges, and that the resin used to manufacture the filter media meets the food contact requirements of the regulations. US FDA CFR 21. When necessary, specify only FDA compatible sealing materials and end adapters. GE cartridge filters are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users must carefully verify chemical compatibility.

Data sheet

Purtrex GE Cartridges

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.