Manual Residential and Commercial Water Softener

The line of domestic - commercial manual softeners

They are designed for the treatment of hard water in residential and commercial applications, where water consumption is less than 22 hours.

For an adequate cost benefit ratio, it is recommended to use it to soften water with total hardness ≥ 200 mg / L (ppm).

Advantage:
Reduction of scale formation, which causes stains and encrustations in glassware, cutlery, bathroom and kitchen furniture.
Savings in the consumption of detergents and fabric softeners.
Reduction of the sensation of dryness in hair and skin.
Prevention of scale formation in heaters.
Prevention of clogging of pipes.

Operating conditions:
System operating pressure: 20 to 100 psi.
Max temp. operating temperature: 49 ° C.
Feeding water:
Prefiltration: 5 𝝁m
Input pH: 6.0 - 10.0
Free chlorine: <0.5 mg / L
Turbidity: <5.0 NTU

This line is available in tanks from 8 × 44 ”to 24 × 72”, to treat from 1.5 to 45 gpm of instantaneous flow.


Simple manual operation smoother

Simple manual softeners: single tank equipment with cationic resin, with manual control valve for regeneration by time (manually the days calculated in your water analysis) .Recommended for domestic or commercial use, with non-variable consumption and operation less than 22 h.
Models: 

Manual softeners:

Code
Tank size (in)
Resin volume (ft3)
Design capacity (gr hardness)
Salt to regenerate (lb salt)
Maximum capacity (gr hardness)
Salt to regenerate (lb salt)
Minimum service flow (gpm)
Maximum service flow (gpm)
Backwash flow (gpm)
Manual valve
P_640001
8*44
0.75
15,000
5.6
21,000
11.3
1.5
3.8
1.75
Purago S1
P_640002
9*48
1.00
20,000
7.5
28,000
15.0
2.0
5.0
2.20
Purago S1
P_640003
10*54
1.50
30,000
11.3
42,000
22.5
3.0
7.5
2.75
Purago S1
P_640004
12*52
2.00
40,000
15.0
56,000
30.0
4.0
10.0
4.00
Purago S1
P_640005
13*54
2.50
50,000
18.8
70,000
37.5
5.0
12.5
4.60
Purago S1
P_640006
14*65
3.00
60,000
22.5
84,000
45.0
6.0
15.0
5.50
Purago S2
P_640007
16*65
4.00
80,000
30.0
112,000
60.0
8.0
20.0
7.00
Purago S2
P_640008
18*65
5.00
100,000
37.5
140,000
75.0
10.0
25.0
9.00
Purago S2
P_640009
21*62
7.00
140,000
52.5
196,000
105.0
14.0
35.0
12.00
Purago S2
P_640010
24*72
9.00
180,000
67.5
252,000
135.0
18.0
45.0
15.50
Purago S2

To select the most suitable softener for your needs, you must know the quality of the water you are going to treat. If you have questions about the selection, contact one of our advisors.

Calculation of softener capacity:

Water hardness is usually expressed in mg / L CaCO3, also known as parts per million (ppm), but it can also be expressed in other units, such as grains per gallon (gpg), 1 gpg = 17.1 mg / L or 17.1 ppm.

To calculate the volume of water that your equipment will be able to soften, you must know the hardness of the water to be treated in gpg and the capacity of the softener, which is directly related to the salt with which the equipment is regenerated.

In the specifications table, there are two columns, one for Design Capacity and another for Maximum Capacity, expressed in grams of hardness per equipment. Each one has specified the salt with which the resin must be regenerated to obtain this capacity.

Once the size of the equipment has been selected, the value of the equipment capacity (in gr) is taken and divided by the water hardness (in gpg). The result is the number of gallons of water the equipment can handle before saturating. When the consumption is not variable, this flow can be transformed into days, dividing the number of gallons that can be treated by the consumption per day.

Data sheet

Data sheet

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.