Panda Chlorine Automatic Doser

The Panda automatic chlorinator is an in-line dispenser that is installed directly in the return pipe of the water to the pool, this allows it to work without the need for additional hoses or connectors.

The chlorinator has a control valve to regulate flows.

Directions of use:

• Before using the automatic chlorinator, make sure it is properly balanced and conditioned.
• The approximate residual chlorine concentration is 1.0 to 1.5 ppm. (According to the chemical manufacturer's instructions).
• Residual chlorine should be checked daily, adjust the valve to add more or less chlorine according to your needs.
• The chlorine that the pool needs depends on the use, temperature, sunlight, etc. At first you will need to review the chemical levels to determine the proper chlorine load and properly adjust it to the control valve to dispense the required chlorine for your need.

To avoid unexpected technical problems, read the safety instructions of the equipment before operating or maintaining it and we give you the following recommendations:

• Do not allow children to handle this product.
• Cover your eyes and skin while servicing equipment.
• Do not inhale the gases from the chlorinator or chemical containers.
• The chlorine dispenser may be under pressure.

Use only 3 ”diameter tablets of Low Dissolve Trichloro-S Triazinetrione.
- Never use fast dissolving chlorine tablets.
- Never mix Trichloro-S Triazinetrione Tablets with Calcium Hypochlorite, or with any other form of concentrated chlorine or other type of chemical.